|
法國polymetron配件
|
| Item# |
Desc1 |
| Z104054290 |
Combination electrode |
| Z105702,40050 |
Fuse 50mA |
| Z145262,13550 |
Venting plug |
| Z148644,05062 |
Conn., 10-32UNF thread, nipple 1.6mm tube, 10 pcs |
| Z148644,05125 |
Fitting - nipple type- 10/32UNF for 1/8" or 4 mm tubing |
| Z148983,00430 |
Plug for O2 measuring cell for ppb |
| Z148983,01430 |
plug for O2 measuring cell for ppm |
| Z150453,06611 |
2 wires shielded cable, per m |
| Z150727,10000 |
Shielded special cable for inductive probe, per m (2669 model) |
| Z150847,20205 |
Shielded 5-conductor cable, per m (8943) |
| Z151065,08699 |
PTFE tubing Ø 0.8x1.6 mm (per meter) |
| Z151380,00000 |
Electrolyte tubing, per m |
| Z151399,90002 |
Tygon tubing, diam. = 1.6/3.2 mm (per meter) |
| Z151399,90006 |
Tygon tubing, diam. = 2.4/4.0 mm (per meter) |
| Z151400,22383 |
PE tube 2x3 mm (per meter) |
| Z151400,22387 |
Tubing in PE (low density), ø 6x8 mm (per meter) |
| Z151400,22390 |
PE 10/12 mm tubing |
| Z151575,00005 |
Tubing, 5x1 mm, polyethylene |
| Z151575,00006 |
Tubing in PE (low density), ø 4x6 mm (per meter) |
| Z154841,24909 |
O-ring for 8340 hood |
| Z199482,00060 |
Printer tape for printer 8844 (1 roll) |
| Z355936,00000 |
Tubing made of silicone - 2.0x6.0mm - per meter |
| Z356099,00000 |
O-ring, 3.69 x 1.78 mm, for 9073 temperature sensor |
| Z356099,05040 |
O-ring (4 x 1 mm, viton) of the sampling flow-rate adjustment screw. |
| Z356099,05090 |
O-Ring for Venturi valve, Sodimat + Sodimat K + Hydrastat |
| Z356099,05100 |
O-ring 1,0 X 10,0 |
| Z356099,05220 |
O-ring Viton 22x1 mm (around mirror) |
| Z356099,15040 |
O ring, Viton for use on 8873 Sodimat-temperature sensor and 8362pH-probe and 921X-hollow fiber |
| Z356099,15055 |
O-ring for stainless steel tubing, 5.5 x 1.5mm |
| Z356099,25160 |
O-ring, 16 x 1.5 mm, Viton, for dismountable windows of the photometer's cell (40mm - like on 9097Silica) |
| Z356099,35240 |
Viton o-ring 24/2 |
| Z356099,35380 |
Viton O-ring 38x2mm (around level detector) |
| Z356207,00000 |
Electrode gasket 10.77x2.62mm |
| Z358048,00000 |
Coaxial cable with 4 extra stranded wires, per m (2654 model) |
| Z359000,40780 |
Pt100 temperature sensor |
| Z359002,44000 |
Nut for PG7 cable gland (cable gland to be ordered separetely) |
| Z359004,00435 |
Viton O ring, flat (Dimensions= Ext 19/ Int 11,5/ H 3 mm), tightness diaphragm 8877 |
| Z359012,00070 |
Electrode washer, 18 x 12.5 x 3mm, teflon |
| Z359015,20035 |
Threaded sleeve PG13.5 |
| Z359016,00000 |
Flexible tubing (red) onto RefElectrode (one per port) |
| Z359016,10000 |
Adaptor plug for level detector TL350 |
| Z359016,10101 |
Electrode cable, 0.5m with AS7 connector (for reference electrode only) - Use on 9073, 9186 |
| Z359016,10105 |
Electrode cable, 1 m with AS7 connector (for reference electrode) |
| Z359016,10110 |
pH electrode cable, 3 m with AS9 connector (working or combination electrode) |
| Z359016,10111 |
Electrode cable, 1 m with AS9 connector (working or combination electrode) |
| Z359016,10112 |
Electrode cable, 0.5m with AS9 connector ( for working or combination electrode) - Use on 9073 |
| Z359016,10120 |
pH electrode cable, 10 m with AS9 connector (working or combination electrode) |
| Z359016,10122 |
pH electrode cable, 20 m with AS9 connector (working or combination electrode) |
| Z359016,10140 |
pH electrode cable, 3 m with AS7 connector (for reference electrode) |
| Z359016,10141 |
pH electrode cable, 10 m with AS7 connector (for reference electrode) |
| Z359016,10142 |
pH electrode cable, 20 m with AS7 connector (for reference electrode) |
| Z359016,10180 |
Cable for temperature compensator, 3 m with AS9 connector |
| Z359025,00060 |
Support rod |
| Z359026,00000 |
Electrolyte reservoir with tubing, venting plug |
| Z359026,00010 |
Electrolyte reservoir |
| Z359028,00060 |
Protective basket |
| Z359028,20001 |
Set of 2 adjustable flange fittings NW15/ND10 |
| Z359028,30000 |
Set of 2 polypropylene pipe fittings NW15/ND10 |
| Z359029,00050 |
Plug |
| Z359033,00030 |
Electrode holder |
| Z359033,00040 |
Protective hood |
| Z359035,00140 |
Drive shaft Inox 500 mm |
| Z359035,00141 |
Drive shaft Inox 1000 mm |
| Z359035,00142 |
Drive shaft Inox 1500 mm |
| Z359035,00170 |
Drive shaft bearing |
| Z359035,00190 |
Clutch driver |
| Z359035,00220 |
Gear support rod |
| Z359035,00700 |
Electrode container |
| Z359035,00730 |
Electrolyte tube 500 mm for 8346.1E |
| Z359035,00731 |
Electrolyte tube 1000 mm for 8346.2E |
| Z359035,00732 |
Electrolyte tube 1500 mm for 8346.3E |
| Z359072,00120 |
Black nut maintain 918X electrodes in probe body (PG13.5 polycarbonates) |
| Z359090,00024 |
Venturi nozzle of venturi block from Hydrastat 8879 and 9186 |
| Z359090,00030 |
Glass Cylinder |
| Z359090,00070 |
Seal |
| Z359090,00270 |
Empty carcal cartridge |
| Z359090,20000 |
Filter cartridge, 12-pc. Set (Extended lead-time may occur on this spare-part because the analyser itself was obsolete more than 5 years ago) |
| Z359090,20020 |
Calibration cartridge 20ppb, 12-pc. set |
| Z359090,20200 |
Calibration cartridge 200ppb, 12-pc. set |
| Z359090,70000 |
Tube set tygon 12 pc orange/green |
| Z359090,70002 |
Tube set Tygon (12 pcs) orange/blue |
| Z359090,70006 |
Tube set Tygon (12 pcs) white/yellow |
| Z359090,70010 |
Tube set tygon (12pcs) white / black |
| Z359090,70015 |
Tube set Tygon (12 pcs) grey-grey |
| Z359090,70020 |
Tube set Tygon (12 pcs) green-green |
| Z359090,70021 |
Tube set Tygon (12 pcs) purple-purple |
| Z359090,80000 |
Tube cassette for peristaltic pump |
| Z359091,00000 |
Cell body |
| Z359091,00050 |
Stainless steel counter electrode |
| Z359091,00060 |
Seal for cell |
| Z359091,00100 |
Measuring cell, complete |
| Z359091,00160 |
Special plug with cable |
| Z359091,00300 |
Working ring electrode for >200 ppb |
| Z359091,06010 |
Coton for filter |
| Z359092,00061 |
Retaining ring |
| Z359092,00070 |
Seal for measuring cell, lower |
| Z359092,00080 |
Seal for measuring cell, upper |
| Z359092,00091 |
Membrane, 5-pc. set in labeled vial for ppb range |
| Z359092,00101 |
O2 measuring cell |
| Z359092,00201 |
Faraday cell |
| Z359092,00451 |
Membrane, 5-pc. set in labeled vial for ppm range |
| Z359092,10401 |
Calibration unit, complete |
